Description
Marabu ClearShield Select is made with the most recent developments in water-based coating technology and offers superior resistance to abrasion, chemicals, and UV rays. ClearShield Select improves image quality while providing superior protection for digital prints. The new coatings work on a variety of digital substrates and offer enhanced outdoor protection as well as enhanced chemical and mar resistance. For both manual and automated applications, the ClearShield Select coatings are available in gloss, semi-gloss, and matte finishes. It is intended to be applied with a roller or spray equipment on a wide range of digitally printed products including pressure sensitive vinyl, banners and rigid substrates.
Benefits:
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications:
Product type : Water based liquid coating
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners, rigid substrates
Coverage of 1L : around 14-15m2 with Roller
Applications:
Banners
Billboards
Exterior Signage
Vinyl
Rigid Substrates
Application Method:
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products Finishes available:
Gloss
Semi-Gloss
Matte
XJ-740 Carton, Cover – 1000003548
$407.37The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000003548
Manufacturer part number: 1000003548
Manufacturer: Roland
QS Series FS Kit, Purge Wiper, Suction Block – 45066759
$131.76The VUTEk QS series of printers are compatible with this generic PURGE WIPER, SUCTION BLOCK.
SKU: PCAVU13089O
Manufacturer part number: 45066759
Manufacturers: DIGIPRINT , EFI
CONNECTOR,SUPPLY SECTION PMCD – 1000021862
$491.43This original Roland component, the CONNECTOR, SUPPLY SECTION PMCD, is compatible with a specific range of Roland printers.
SKU: 1000021862
Manufacturer part number: 1000021862
Manufacturer: Roland
Jeti Jason Toothed Timing Belt – 615-960820
$162.40This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt is temperature resistant from -20 to 100°C, has a circumference of 960mm and a width of 20mm. This is the original Agfa / Gandinnovations part (number 615-960820).
SKU: HTD 960-8M
Manufacturer part number: 615-960820
Manufacturer: Agfa
UJV100-160 Sub Tank Assy – MP-M012080
$371.44Mimaki UJV100-160 printers are compatible with this Sub Tank Assembly.
SKU: MP-M012080
Manufacturer part number: MP-M012080
Manufacturer: Mimaki
CJV300-160 Y Drive Belt 160 – M801828
$278.75This Y Drive Belt 160 is suitable for CJV300-160, CJV150-160, JV150-160 and JV300-160 printers.
SKU: M801828
Manufacturer part number: M801828
Manufacturer: Mimaki
Related Products
DIGIMEDIA Monomeric Matte Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42
DIGIMEDIA Monomeric Matte Overlaminate – 1060 mm x 50 m (42″ x 164′)
$164.50
Marabu Clearshield® Wall Armor – 20L, Satin
$1,116.30Marabu Clearshield® Wall Armor is a water-based liquid coating that offers stain, scratch and abrasion resistance as well as fire retardancy to your digital wall covering prints. Eco-solvent, UV-curable, and latex inks are all compatible with Clearshield® Wall Armor.
SKU: 360299853
Manufacturer part number:Â 360299853
Manufacturer: Marabu
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
DIGIMEDIA Monomeric Overlaminate
$228.14High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Prices start at €1.20 per square meter.
SKU: DLMG54
Manufacturer part number: DLMG54
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.