This adapter, KQ2H08-02S, works with the DGI MegaJet MJ-3204, MegaJet MJ-3206, and PolaJet series printers. This is the original DGI part (number CAPSM01-0010). The inner diameter of the fitting KQ2H08-02S is 0.6 cm, while the outer diameter is 1.2 cm. It has a length of 2.7 cm.
This L-Bearing is suitable for Roland SP-300I / VP-300 / VP-300I / VP-540 / VS-300 printers. The original Roland part (number 1000002196) can be found here. This L-Bearing is 1440 mm long.
SKU: 1000002196
Manufacturer part number: 1000002196
Manufacturer: Roland
Roland printers can use this ADAPTER,JOINT MCI-1
SKU: 1000014829
Manufacturer part number: 1000014829
Manufacturer: Roland
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
This Steel Belt (100) Assy is suitable for Seiko Colorpainter 100S printers.
SKU: U00097291100
Manufacturer part number: U00097291100
Manufacturer: Oki
The cutting plotters Mimaki CG-60st and CG-60SR can be used with this generic Y Belt 60.
SKU: PBEMI83003O
Manufacturer part number: M800920
Manufacturers: DIGIPRINT , Mimaki
This Sub Tank Assy is suitable for Mutoh Valuejet 1608 Hybrid printers.
SKU: DG-45834
Manufacturer part number: DG-45834
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.