Description
The EFI VUTEk QS series of printers are compatible with this VUTEk Coupling, 1/8″ NPT Valved Connector Male Simriz. This high-quality component matches the EFI VUTEk component (number 45072842).
More Products
Arizona 660 Belt Gantry XT – 3W3010107030
$1,055.02Océ Arizona 250 GT printers are compatible with this Belt Gantry GT.
SKU: 3W3010107030
Manufacturer part number: 3010107030
Manufacturer: Canon Océ
TX2-1600 Hose Joint – M601138
$43.95Mimaki TX2-1600 printers are compatible with this Hose Joint. The outer diameter of this Hose Joint is 34.1mm, while the inner diameter is 19.05mm. This is original Mimaki part (number M601138).
SKU: M601138
Manufacturer part number: M601138
Manufacturer: Mimaki
XF-640 Carton, Stand – 1000010326
$82.32This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000010326
Manufacturer part number: 1000010326
Manufacturer: Roland
Arizona 6100 FTG Push 1/4 OD 5/32 ID TEE – 3W3010105241
$19.73Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SKU: 3W3010105241
Manufacturer part number: 3010105241
Manufacturer: Canon Océ
Roland ADAPTER, AS1002F-04-X214 – 1000013850
$168.69The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000013850
Manufacturer part number: 1000013850
Manufacturer: Roland
Marabu ClearShield Classic Lite – 1L, Gloss
$76.53Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360297811
Manufacturer part number: 360297811
Manufacturer: Marabu
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.