Description
The EFI VUTEk QS series of printers are compatible with this VUTEk Coupling, 1/8″ NPT Valved Connector Male Simriz. This high-quality component matches the EFI VUTEk component (number 45072842).
More Products
FTG-PUSH ELBOW 1/4OD X 1/8NPT – 3010104463
$26.66Océ Arizona 550XT is compatible with this Fitting Push.
SKU: 3010104463
Manufacturer part number: 3010104463
Manufacturer: Canon Océ
CG-130FX Toothed Belt 130 – M800663
$66.95Mimaki CG-130 FX printers can use this generic toothed belt.
SKU: PBEMI_7577O
Manufacturer part number: M800663
Manufacturers: DIGIPRINT , Mimaki
UJF-3042 Cap rubber R – M700652
$154.11Mimaki printers can use this UJF-3042 Cap rubber R – M700652.
SKU: M700652
Manufacturer part number: M700652
Manufacturer: Mimaki
AW EP-180 (S/W) Capping Unit
$76.63The Allwin AW EP-180 (S/W) and AW EP-320 (S/W) printers are compatible with this solvent capping unit. This is the first Allwin component.
SKU: PCAAL18033
Manufacturer: Allwin
FJ-50 ADAPTER,TUBE – 11909130
$12.61The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 11909130
Manufacturer part number: 11909130
Manufacturer: Roland
UJF-3042 Fitting Assy – M010328
$84.38The Mimaki UJF-3042, UJF-3042HG, and UJF-3042FX printers can use this Fitting Assy.
SKU: M010328
Manufacturer part number: M010328
Manufacturer: Mimaki
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.