This Steel Belt (A1) is suitable for Mutoh RJ-800 printers. This is a high quality generic belt that corresponds to Mutoh part number DE-49764A. This belt is 2713mm long and 15mm wide. This product has been discontinued by Mutoh, and only the generic belt is available.
This Y Type Fitting Assy is suitable for Mutoh VJ-1324 printers.
SKU: DG-42982
Manufacturer part number: DG-42982
Manufacturer: Mutoh
This Y connector with a solvent resistance helps connect three tubes with an ID of 2 mm and an OD of 3 mm.
SKU: PCNDI8747
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
This I-Joint (2 – 3) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-42521
Manufacturer part number: DG-42521
Manufacturer: Mutoh
This LM guide is suitable for Roland VS-640 printers. The rail alone, without the blocks, is included in this item, which is part number 1000006512. This LM Guide is 2320mm long.
SKU: 414SR15-1440L
Manufacturer part number: 1000006512
Manufacturer: Roland
This set of 20 Fitting Luer Male 5/32 BA is suitable for VUTEk QS-series and GS-Series printers.
SKU: Y240-1/20
Manufacturer part number: P5105-A
This TRIAC is suitable for STAHLS Hotronix® Airfusion ™
SKU: N-1-1059
Manufacturer part number: N-1-1059
Manufacturer: Stahls
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.