Description
This BEARING is suitable for Roland printers. This is the original Roland part (number 22175798). This part is no longer available. The manufacturer has discontinued it.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
This product has multiple variants. The options may be chosen on the product page
QS Series Fitting Luer 1/8 Male ( 20 pcs) – P1922-A
$72.98The VUTEk UltraVU 150, VUTEk PressVU 200/600, and VUTEk QS-series printers can all use this set of 20 Fitting Luer 1/8 Males.
SKU: MTLL013-1/20
Manufacturer part number: P1922-A
Manufacturers: EFI , DIGIPRINT
Roland Guide Bearing NO.2 – 22175741
$257.26This Guide Bearing NO.2 is suitable for all Roland printers.
SKU: 22175741
Manufacturer part number: 22175741
Manufacturer: Roland
26 pin Connector – AKC26H-ND
$12.63SKU: AKC26H-ND
Manufacturer part number: AKC26H-ND
Manufacturer: DIGIPRINT
Waste Fluid Tray Assy – DG-47746
$106.29This Waste Fluid Tray Assy is an original Mutoh component that works with certain Mutoh printer models.
SKU: DG-47746
Manufacturer part number: DG-47746
Manufacturer: Mutoh
FJ-540 Belt, 516P2M4-530 – 1000000382
$62.18Roland FJ-540 printers are suitable for this Belt, 516P2M4-530.
SKU: 1000000382
Manufacturer part number: 1000000382
Manufacturer: Roland
This product has multiple variants. The options may be chosen on the product page
Roland L-BEARING HSR15R2SSE+280L-2 – 21895130
$1,706.84This L-BEARING HSR15R2SSE+280L-2 is suitable for Roland printers. This is the original Roland part (number 21895130).
SKU: 21895130
Manufacturer part number: 21895130
Manufacturer: Roland
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.