Description
This L-BEARING,BALL BUSH N-20VUU is suitable for Roland printers. This is the original Roland part (number 11899162). This part is no longer available. The manufacturer has discontinued it.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
This product has multiple variants. The options may be chosen on the product page
RJ-8000 Ink ID Board Assy – DF-43968
$131.58This Ink ID Board Assy (Smart Chip reader) is suitable for Mutoh RJ-8000 (Falcon II) printers.
SKU: DF-43968
Manufacturer part number: DF-43968
Manufacturer: Mutoh
This product has multiple variants. The options may be chosen on the product page
XJ-640 L-Bearing LWES15R2560 (Rail only)
$1,606.15This linear bearing rail is suitable for Roland XJ-640 printers. This rail is required to use new LWES15Q (PMERO18951) linear bearing blocks when your printer is equipped with the older, discontinued LWES15QQ linear bearing blocks. This rail is 2560mm long.
SKU: LWE15R2560HS2/A2
Manufacturer: Roland
X-Rite i1Profiler 1.6.1 (Software Only)
$3,820.16This is the i1 Profiler version 1.6 software only. It can be used stand-alone or for users with an i1 Basic or an i1 OEM device (that shipped bundled with your printer or RIP software) that want to upgrade to the latest software and feature set. It can also be used to upgrade an i1 Basic Pro 2 to i1 Publish Pro 2.
SKU:Â EOPROF
Manufacturer:Â X-rite
FTG-PUSH ELBOW 1/4OD X 1/8NPT – 3010104463
$26.66Océ Arizona 550XT is compatible with this Fitting Push.
SKU: 3010104463
Manufacturer part number: 3010104463
Manufacturer: Canon Océ
X Drive Belt – DG-48833
$105.97This X Drive Belt is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48833
Manufacturer part number: DG-48833
Manufacturer: Mutoh
Colorpainter 100S Steel Belt – U00097291100
$1,507.18This Steel Belt (100) Assy is suitable for Seiko Colorpainter 100S printers.
SKU: U00097291100
Manufacturer part number: U00097291100
Manufacturer: Oki
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Reviews
There are no reviews yet.