Description
This L-BEARING,RSR9ZMUUC1+380LM is suitable for Roland printers. This is the original Roland part (number 21895134). This part is no longer available. It has been discontinued by the manufacturer.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
VS-640 L-Bearing, SSR15XW1GGE/W2GE+2320L – 1000006512
$4,636.33This L-Bearing is suitable for Roland VS-640 printers. The original Roland component can be found here (number 1000006512). This L-Bearing is 2.32m long.
SKU: 1000006512
Manufacturer part number: 1000006512
Manufacturer: Roland
XC-540 Linear Bearing (LWES15C3R2320QE) – 21895152
$2,669.95This Linear Bearing (LWES15C3R2320QE) is suitable for Roland printers.
SKU: LWES15C3R2320QE
Manufacturer part number: 21895152
Manufacturer: Roland
SJ-1000 L-Bearing, SSR15XW2GE+3500LY – 21895168
$6,123.26This L bearing is suitable for Roland SJ-1000 / SJ-1045EX printers. This is the original part (number 21895168). This L bearing is 349 cm long. This L-bearing is suitable for SJ-1000 printers with S/N before ZU10204.
SKU: 21895168
Manufacturer part number: 84439990
Manufacturer: Roland
Epson XP600 / TX800 capping unit
$42.02A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEPXP603
Manufacturers: Epson , DIGIPRINT
SX-8 BELT,B248MXL4.8 – 21925123
$34.61Roland SX-8 printers are compatible with this BELT,B248MXL4.8. The original Roland part (number 21925123) is here.
SKU: 21925123
Manufacturer part number: 21925123
Manufacturer: Roland
Marabu ClearShield Classic – 20L, Gloss
$1,045.79Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
Related Products
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Reviews
There are no reviews yet.