Description
This R-BEARING,6203RS is suitable for Roland printers. This is the original Roland part (number 21885137). This part is no longer available. It has been discontinued by the manufacturer.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
This product has multiple variants. The options may be chosen on the product page
Jeti 3312 UNF Thread to Hose Barb connector 3mm ID Tubing (10 pcs)
$51.21This set of ten UNF Thread to Hose Barb connectors is used on the Jeti 3312 ink tank and is compatible with 3mm ID tubing. The original Agfa part is here. The inner diameter of this UNF Thread to Hose Barb connector is 2.41 millimeters, while the outer diameter is 3.30 millimeters.
SKU: PCNAG13439
Manufacturer: Agfa
Toucan Steel Belt, 64 Assy – DF-44131
$221.67This generic Steel Belt, 64″ Assy is suitable for Mutoh Toucan 64 and Toucan Hybrid printers. This is a high quality generic part that corresponds to Mutoh part number DF-44131. Mutoh does not manufacture the original belt anymore as it was discontinued. This belt measures 472.5cm long and 2.5cm wide.
SKU: PBEMUTO6001O
Manufacturer part number: DF-44131
Manufacturers: DIGIPRINT , Mutoh
GS Series Belt Timing HTD-5, 30 MM W X 430 IN – 45075896
$3,412.71This timing belt is suitable for EFI VUTEk GS series printers. The original EFI component is this one (number 45075896). This timing belt has a width of 30 mm and a length of 10,92 m.
SKU: 45075896
Manufacturer part number: 45075896
Manufacturer: EFI
SJ-500 L-Bearing SSR15XW2+1960LY – 21895151
$3,452.67The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 21895151
Manufacturer part number: 21895151
Manufacturer: Roland
This product has multiple variants. The options may be chosen on the product page
Roland CUTTER BEARING DDR-620ZZ – 22175875
$21.03The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 22175875
Manufacturer part number: 22175875
Manufacturer: Roland
Waste Ink Bottle B Kit – DG-49081
$376.86This Waste Ink Bottle B Kit is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-49081
Manufacturer part number: DG-49081
Manufacturer: Mutoh
Related Products
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.