Description
This R-BEARING,6802ZZCMP5NS7L is suitable for Roland printers. The original Roland component can be found here (number 1000015970). This part is no longer available. It has been discontinued by the manufacturer.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
JV3-160SP Cap Slider 4H2 Assy – M007814
$266.18Mimaki JV3-160SP printers can use this capping station with four print heads.
SKU: PCAMIJV3002O
Manufacturer part number: M007814
Manufacturers: DIGIPRINT , Mimaki
F Fitting (10pcs/box) – DG-49572
$150.12This original Mutoh F Fitting (10 pieces per box) is suitable for a specific Mutoh printer line.
SKU: DG-49572
Manufacturer part number: DG-49572
Manufacturer: Mutoh
Rockhopper 62 Steel Belt – DF-41754
$238.85This generic steel Belt is suitable for Mutoh Rockhopper 62 (Falcon Outdoor) printers. This is a generic high quality belt that corresponds to Mutoh part number DF-41754. This Belt is 435.2cm long and 1.5cm wide.
SKU: BE006241754
Manufacturer part number: DF-41754
Manufacturers: DIGIPRINT , Mutoh
L Shaped Fittings – DH-40873
$152.59This original Mutoh part in the shape of an L is compatible with a specific line of Mutoh printers.
SKU: DH-40873
Manufacturer part number: DH-40873
Manufacturer: Mutoh
XC-540 Belt,150S2M2500LW-C – 1000001902
$45.66For Roland XC-540 printers, this high-quality generic belt that matches Roland part number 1000001902 is suitable.
SKU: PBEROXC60012O
Manufacturer part number: 1000001902
Manufacturers: DIGIPRINT , Roland
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
Related Products
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Reviews
There are no reviews yet.