Description
For Roland printers, this R-BEARING,JIS 606ZZ is suitable. The original Roland part in this case is number 1000002269. The supply of this component has ceased. It has been discontinued by the manufacturer.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
TX400-1800 Cap Sponge – M700555
$37.77The Mimaki TX400-1800B and TX400-1800D printers can use this Cap Sponge.
SKU: M700555
Manufacturer part number: M700555
Manufacturer: Mimaki
SummaSign / SummaCut Motor – KIT-1042
$1,725.47This kit is suitable for SummaSign and SummaCut Series.
SKU: KIT-1042
Manufacturer part number: KIT-1042
Manufacturer: Summa
JFX Series Sub Tank Assy – M008554
$167.80This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: M008554
Manufacturer part number: M008554
Manufacturer: Mimaki
Jetrix 2030 Speed Controller with Fitting
$74.01This Speed Controller with Fitting is suitable for Inktec Jetrix 2030 series printers.
SKU: AS1001FG-06
Manufacturer part number: 00-AK00-05
Manufacturer: Inktec
Marabu ClearShield Classic Lite – 1L, Gloss
$76.53Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360297811
Manufacturer part number: 360297811
Manufacturer: Marabu
Arizona FTG-STOPCOCK MF LUER BLK – 2100056424
$125.33Océ Arizona printers are compatible with this FTG-STOPCOCK MF LUER BLK.
SKU: 2100056424
Manufacturer part number: 2100056424
Manufacturer: Canon Océ
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Reviews
There are no reviews yet.