Description
For Roland printers, this R-BEARING,JIS 606ZZ is suitable. The original Roland part in this case is number 1000002269. The supply of this component has ceased. It has been discontinued by the manufacturer.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
This product has multiple variants. The options may be chosen on the product page
SummaCut ASSY, Y-BELT D60 – 399-631
$277.42SummaCut cutters are compatible with this ASSY, Y-BELT D60. This is the first part of the Summa (numbered 399-631).
SKU: 399-631
Manufacturer part number: 399-631
Manufacturer: Summa
VJ-1604 X Speed Reduction Belt – DF-43883
$169.16This X Speed Reduction Belt is suitable for Mutoh VJ-1604 printers.
SKU: DF-43883
Manufacturer part number: DF-43883
Manufacturer: Mutoh
Straight Through Tube Fitting ID Tubing 3.2mm Nylon White (20 pcs)
$86.87This set of twenty straight through tube fittings made of white nylon that resist solvents is compatible with all wide format inkjet printers.
SKU: CC-1/20
Manufacturer: DIGIPRINT
This product has multiple variants. The options may be chosen on the product page
XJ-640 L-Bearing LWES15R2560 (Rail only)
$1,606.15This linear bearing rail is suitable for Roland XJ-640 printers. This rail is required to use new LWES15Q (PMERO18951) linear bearing blocks when your printer is equipped with the older, discontinued LWES15QQ linear bearing blocks. This rail is 2560mm long.
SKU: LWE15R2560HS2/A2
Manufacturer: Roland
Kit S2 75 Belts (X/Y) – KIT-2025
$676.66This kit is suitable for Summa S2 75D Series.
SKU: KIT-2025
Manufacturer part number: KIT-2025
Manufacturer: Summa
Fitting for G638W 2X6 (3pcs)
$105.30This set of 3 fittings is suitable for EFI Vutek H2000.
SKU: PADVUG68W
Manufacturer: DIGIPRINT
Related Products
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.