Description
For Roland printers, this R-BEARING,JIS 606ZZ is suitable. The original Roland part in this case is number 1000002269. The supply of this component has ceased. It has been discontinued by the manufacturer.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
This product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
SP-540v L-Bearing LWES15Q (Blocks – 3 pcs)
$1,335.73Roland SP-540v printers are compatible with this LWES15Q block.
SKU: LWES15C3R220Q
Manufacturer part number: 21895169
Manufacturer: Roland
TPD7 Heat Press Connector
$63.12Secabo TPD7 Dual heat presses are compatible with this connector. This is the first part of Secabo. The inner diameter of this connector is 5.78 mm.
SKU: 990.200.12
Manufacturer: Secabo
LEJ-640 Carton, Stand Stay – 1000008129
$183.37This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000008129
Manufacturer part number: 1000008129
Manufacturer: Roland
Arizona 6100 FTG Push 1/4 OD 5/32 ID TEE – 3W3010105241
$19.73Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SKU: 3W3010105241
Manufacturer part number: 3010105241
Manufacturer: Canon Océ
GS Series Fitting Luer Male 5/32 BA (20 pcs) – P5934-A
$90.34This set of 20 Fitting Luer Male 5/32 BA is suitable for VUTEk QS-series and GS-Series printers.
SKU: Y240-1/20
Manufacturer part number: P5105-A
ST-1806 Sub Solution Tank Assy – ABOX-NKB0001
$849.50This sub solution tank assembly is suitable for DGI SaturnJet ST-1806 printers. The original DGI component (number ABOX-NKB0001) is here.
SKU: ABOX-NKB0001
Manufacturer part number: ABOX-NKB0001
Manufacturer: DGI
Related Products
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.