Description
Roland SJ-1000 printers are compatible with this ASSY,TU L BEARING. The original Roland part (number 22805523) is here.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
Mimaki JV5 Capping Assy (2pcs)
$97.40Mimaki JV5 printers can use this set of two generic capping assys.
SKU: PCAMIJV5003
Manufacturer part number: M905240
Manufacturers: DIGIPRINT , Mimaki
Arizona 250 Belt Gantry GT – 3W3010103684
$1,264.68This Belt Gantry GT is suitable for Océ Arizona 250 GT printers. This is the original Océ part (number 3010103684). This Belt Gantry GT is 385.6cm long and 3.8cm wide.
SKU: 3W3010103684
Manufacturer part number: 3010103684
Manufacturer: Canon Océ
TX400-1800D Joint Valve (L) Assy – M009844
$55.60This TX400-1800D Joint Valve (L) Assy – M009844 is suitable for Mimaki printers.
SKU: M009844
Manufacturer part number: M009844
Manufacturer: Mimaki
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
UJF-3042 Cap Assy – M012112
$100.87Mimaki UJF-3042 printers can use this generic Cap Assy.
SKU: PCAMI14085O
Manufacturer part number: M012112
Manufacturers: DIGIPRINT , Mimaki
LEC-540 LM Guide 2560L (Rail Only)
$5,045.47This LM Guide 2560L is suitable for Roland LEC-540 printers. This part includes the rail only (without the blocks) that corresponds to part number 1000007041. This LM Guide is 2560mm long.
SKU:Â 414SR15-0520LY
Manufacturer part number:Â 1000007041
Manufacturer:Â Roland
Manufacturer part number:Â 1000007041
Manufacturer:Â Roland
Related Products
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.