Manifold that is compatible with Epson DX4 printheads and resists solvents. You can transform a water-based Epson DX4 printhead into a solvent-resistant component that works with Roland, Mutoh, and Mimaki solvent printers by replacing this manifold. The rubber ring needed to adapt this manifold to a print head is included in the price.
This Steel Belt Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-49266
Manufacturer part number: DG-49266
Manufacturer: Mutoh
This CR Belt fastener is suitable for Mutoh Valuejet 1304 printers. This is the original Mutoh part (number DG-41144).
SKU: DG-41144
Manufacturer part number: DG-41144
Manufacturer: Mutoh
This BEARING 10-19ZZ is an original Roland part, suitable for a specific range of Roland printers.
This Guide Bearing NO.2 is suitable for all Roland printers.
SKU: 22175741
Manufacturer part number: 22175741
Manufacturer: Roland
VUTEk UltraVu II 5330 printers are compatible with this Coupler.25-.25 Flex. This is the original P7816-A VUTEk component. The width of this Coupler.25-.25 Flex is 25.5 mm. It has an inner diameter of 6.33mm and an outer diameter of 25.30mm.
SKU: P7816-A
Manufacturer part number: P7816-A
Manufacturer: EFI
Mutoh Valuejet printers can use this generic capping unit.
SKU: PCAMIVJ601
Manufacturer part number: KY-14060
Manufacturers: DIGIPRINT , Mimaki , Mutoh
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.