Manifold that is compatible with Epson DX4 printheads and resists solvents. You can transform a water-based Epson DX4 printhead into a solvent-resistant component that works with Roland, Mutoh, and Mimaki solvent printers by replacing this manifold. The rubber ring needed to adapt this manifold to a print head is included in the price.
This Bearing holder V320 is suitable for Mimaki JV5-320S & JV5-260S printers. This is the original Mimaki part (number M205571).
SKU: M205571
Manufacturer part number: M205571
Manufacturer: Mimaki
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000003564
Manufacturer part number: 1000003564
Manufacturer: Roland
This synchronous belt (64) is suitable for Seiko Colorpainter 64S and 100S printers.
SKU: U00103427800
Manufacturer part number: U00103427800
Manufacturer: Oki
This LM Guide 2050L is suitable for Roland RS-540 printers. The original Roland part in this case is 1000004745. This LM Guide is 2050mm long.
SKU: 414SSR15-2560L
Manufacturer part number: 1000004745
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000007723
Manufacturer part number: 1000007723
Manufacturer: Roland
This LM guide (2 blocks) is suitable for Mimaki JV5-320S & JV5-320DS printers. This is the original Mimaki part (number SSR15XW2GC1F+4680LYTF). This LM guide is 4680mm long.
SKU: SSR15XW2GC1F+4680LYTF
Manufacturer part number: SSR15XW2GC1F+4680LYTF
Manufacturer: Mimaki
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Select at least 2 products
to compare
Reviews
There are no reviews yet.