Description
This generic linear encoder board is suitable for Roland SP / FJ / SJ series printers. It corresponds to number W840605050 / new part number 6700909040.
Jeti 3312 UNF Thread to Hose Barb connector 3mm ID Tubing (10 pcs)
$51.21This set of ten UNF Thread to Hose Barb connectors is used on the Jeti 3312 ink tank and is compatible with 3mm ID tubing. The original Agfa part is here. The inner diameter of this UNF Thread to Hose Barb connector is 2.41 millimeters, while the outer diameter is 3.30 millimeters.
SKU: PCNAG13439
Manufacturer: Agfa
Marabu ClearShield Classic Lite – 5L, Gloss
$287.41Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298811
Manufacturer part number: 360298811
Jeti Female Luer to Hose Barb Connector 3mm ID Tubing (20 pcs)
$84.18The Jeti ink tank uses this set of 20 Female Luer to Hose Barb connectors, which are compatible with 3mm ID tubing.
SKU: FTLL230-6005/20
Manufacturers: Agfa , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$74.01This CR Deceleration Belt Assy is suitable for Mutoh VJ-1608HS printers.
SKU: PBEMUVA12181
Manufacturer part number: DG-42458
Manufacturer: Mutoh
BANDO Open White PU Belt S2M 15mm (7.8m roll)
$1,011.81BANDO Open White PU Belt S2M 15mm (7.8m roll)
SKU: GALS2M8
Manufacturer: DIGIPRINT
VJ-1624 CR Belt Assy – DG-43002
$218.67Mutoh Valuejet 1624 printers can use this standard CR Belt Assembly. This generic part, which is the same as Mutoh part number DG-43002, is of high quality. The length and width of this CR Belt Assy are 1.5 centimeters.
SKU: PBEMUVA12187O
Manufacturer part number: DG-43002
Manufacturers: DIGIPRINT , Mutoh
Related Products
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Reviews
There are no reviews yet.