Description
This LM guide is suitable for Roland SP-300i printers. This part includes the rail only (without the blocks) that corresponds to part number 1000002196. 1440mm in length is this LM Guide.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | GT-3-Series, GT-5-Series, GT-7-Series, Image PROGRAF iPF W Series, Image PROGRAF iPF2xx Series, Image PROGRAF iPF3xx Series, Image PROGRAF iPF5xx Series, Image PROGRAF iPF5xxx Series, Image PROGRAF iPF6xx Series, Image PROGRAF iPF6xxx Series, Image PROGRAF iPF7xx Series, Image PROGRAF iPF8xx Series, Image PROGRAF iPF8xxx Series, Image PROGRAF iPF9xxx Series, Image PROGRAF PRO Series, Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series, PIXMA Series |
Jetrix Male Luer Integral Lock Ring to 1/4-28 UNF Thread (20 pcs) – 00-AN00-86
$184.15This set of 20 Male Luer Integral Lock Rings to fit the Inktec Jetrix 3015FQ and 2513FRQ printers has a 1/4-28 UNF thread.
SKU: SMTLL-1/20
Manufacturer part number: 00-AN00-86
Manufacturers: Inktec , DIGIPRINT
CONNECTOR,REGULATOR – 1000021957
$156.31This CONNECTOR,REGULATOR is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021957
Manufacturer part number: 1000021957
Manufacturer: Roland
XT-640 CONNECTOR,SPS-4 ST MALE MR – 1000012750
$62.32Roland XT-640 printers are compatible with this CONNECTOR, SPS-4 ST MALE MR. The original Roland part in question is this one (number 1000012750).
SKU: 1000012750
Manufacturer part number: 1000012750
Manufacturer: Roland
QS Series Fitting Luer 1/8 Male ( 20 pcs) – P1922-A
$72.98The VUTEk UltraVU 150, VUTEk PressVU 200/600, and VUTEk QS-series printers can all use this set of 20 Fitting Luer 1/8 Males.
SKU: MTLL013-1/20
Manufacturer part number: P1922-A
Manufacturers: EFI , DIGIPRINT
LEC-330 ADAPTER,TUBE 3-4 – 1000015119
$17.58Roland LEC-330 printers are compatible with this adapter, tube 3-4.
SKU: 1000015119
Manufacturer part number: 1000015119
Manufacturer: Roland
Epson I3200 / I1600 capping unit
$48.54A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEP87857
Manufacturer part number: PCAEP87857
Manufacturers: DIGIPRINT , Epson
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.