Description
This LM guide is suitable for Roland SP-300i printers. This part includes the rail only (without the blocks) that corresponds to part number 1000002196. 1440mm in length is this LM Guide.
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | GT-3-Series, GT-5-Series, GT-7-Series, Image PROGRAF iPF W Series, Image PROGRAF iPF2xx Series, Image PROGRAF iPF3xx Series, Image PROGRAF iPF5xx Series, Image PROGRAF iPF5xxx Series, Image PROGRAF iPF6xx Series, Image PROGRAF iPF6xxx Series, Image PROGRAF iPF7xx Series, Image PROGRAF iPF8xx Series, Image PROGRAF iPF8xxx Series, Image PROGRAF iPF9xxx Series, Image PROGRAF PRO Series, Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series, PIXMA Series |
More Products
Male Luer Integral Lock Ring 2.25mm ID Tubing (100 pc)
$159.85This set of 100 solvent resistant red nylon luer male fittings is suitable for all wide format inkjet printers printers.
SKU: MTLL220/3
Manufacturer: DIGIPRINT
Roland BELT,1242P2M6-530 – 11929129
$101.79This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929129
Manufacturer part number: 11929129
Manufacturer: Roland
Female Luer Lugs 3.2mm ID Tubing (20 pcs)
$83.40This set of twenty female fittings made of white, solvent-resistant nylon is compatible with all wide format inkjet printers.
SJ-500 L-Bearing SSR15XW1 (Block Only)
$653.45Roland SJ-500 printers are compatible with this block, SSR15XW1.
SKU: 414SSR15WSSC1
Manufacturer part number: 21895151
Manufacturer: Roland
This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
$15.08This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
SKU: PCNDI8745
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
I Fitting Assy – DH-40849
$179.67This I Fitting Assy is a genuine Mutoh component that works with certain Mutoh printer models.
SKU: DH-40849
Manufacturer part number: DH-40849
Manufacturer: Mutoh
Related Products
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.