Description
Roland VG-640 printers are compatible with this GASKET,STGH 10-10 L=300MM.
This is the original Roland part (number 1000015159).
The supply of this component has ceased. It has been discontinued by the manufacturer.
More Products
This product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
VS-420 L-BEARING,SSR15XW1GGE/W2GE+1750L – 1000007140
$3,714.37This L-BEARING,SSR15XW1GGE/W2GE+1750L is suitable for Roland VS-420 printers. This is the original Roland part (number 1000007140).
SKU: 1000007140
Manufacturer part number: 1000007140
Manufacturer: Roland
This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
$15.08This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
SKU: PCNDI8745
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
S Series Assy 2nd Ink Tank Cover 3 Out – AA94011
$1,985.72This Assy 2nd Ink Tank Cover 3 Out is suitable for VUTEk QS series printers. This is the original VUTEk part (number AA94011). This Assy 2nd Ink Tank Cover 3 Out has a cable that is 32.9 centimeters long.
End Cap (Female) – DG-48838
$210.16This End Cap (Female) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48838
Manufacturer part number: DG-48838
Manufacturer: Mutoh
X Drive Belt – DG-48833
$105.97This X Drive Belt is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48833
Manufacturer part number: DG-48833
Manufacturer: Mutoh
This product has multiple variants. The options may be chosen on the product page
CJV30-130 LM Guide – SSR15XW1EW1 GEV1GGEV1GE+2020LY
$2,085.24This LM Guide is suitable for Mimaki JV33-160 printers. This is the original Mimaki part (number SSR15xW2GE+2260LY).
SKU: SSR15XW1EW1GE
Manufacturer part number: SSR15XW1EW1GEV1GGEV1GE+2020LY
Manufacturer: Mimaki
Related Products
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Reviews
There are no reviews yet.