Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
This CR Belt Assy is suitable for Mutoh Valujet 1624 printers.
SKU: DG-43002
Manufacturer part number: DG-43002
Manufacturer: Mutoh
This original Roland component, the CONNECTOR, SUPPLY SECTION PMCD, is compatible with a specific range of Roland printers.
SKU: 1000021862
Manufacturer part number: 1000021862
Manufacturer: Roland
The Roland FJ-540 printers are compatible with this ADAPTER, CARRIAGE L.
SKU: 21905170
Manufacturer part number: 21905170
Manufacturer: Roland
Mimaki printers can use this JV400 Fitting – VFI126.
SKU: VFI126
Manufacturer part number: VFI126
Manufacturer: Mimaki
This generic cap is appropriate for the Seiko Colorpainter.
SKU: PCASECP015O
Manufacturer part number: U00101662700
Manufacturer: DIGIPRINT
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011042
Manufacturer part number: 1000011042
Manufacturer: Roland
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Select at least 2 products
to compare
Reviews
There are no reviews yet.