Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
This CAP,IU-1000F is a genuine Roland component that is compatible with a particular line of Roland printers.
SKU: 1000022203
Manufacturer part number: 1000022203
Manufacturer: Roland
This motor belt is suitable for DGI Omega OM-130 printers. This is the first DGI component.
SKU: 10043
Manufacturer: DGI
This generic Steel Belt (100) Assy is suitable for Seiko Colorpainter 100S printers.
SKU: BE100291100
Manufacturer part number: U00097291100
Manufacturers: DIGIPRINT , Oki
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEPXP611
Manufacturers: Epson , DIGIPRINT
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000004498
Manufacturer part number: 1000004498
Manufacturer: Roland
This generic Bearing 684ZZ is suitable for Mutoh Drafstation printers.
SKU: PROMUDR6001
Manufacturer part number: DF-48917
Manufacturers: Mutoh , DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.