Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000005122
Manufacturer part number: 1000005122
Manufacturer: Roland
This capping station belt is suitable for Seiko Colorpainter 64S / Colorpainter 100S / IP-4500 / IP-4010 printers.
SKU: SRS03M288-06NGB
Manufacturer part number: U00036259700
Manufacturer: Oki
This set of 20 Fitting Luer -> 3/32 Male is suitable for VUTEk GS-Series printers.
SKU: MTLL007-6005/20
Manufacturer part number: P2121-A
Manufacturer: EFI
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000016819
Manufacturer part number: 1000016819
Manufacturer: Roland
This COUPLING , PINCH ROLLER BAR is suitable for Summa DC3 printers. This is the first part of the Summa (numbered 420-149).
SKU: 420-149
Manufacturer part number: 420-149
Manufacturer: Summa
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 21895127
Manufacturer part number: 21895127
Manufacturer: Roland
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.