Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
Roland XJ-740 printers are compatible with this Belt,150S2M2974LW-C.
SKU: 1000003599
Manufacturer part number: 1000003599
Manufacturer: Roland
Mutoh RJ-8000 (Falcon II) printers are compatible with this X Speed Reduction Belt. The original Mutoh component (DF-42846) can be found here.
SKU: 19163
Manufacturer part number: DF-42846
Manufacturer: Mutoh
This ADAPTER,STAY HOLDER is suitable for Roland XC-540 printers.
SKU: 1000001550
Manufacturer part number: 1000001550
Manufacturer: Roland
Mimaki UJF-3042 printers are compatible with this Gen Damper adaptor assy.
SKU: M014497
Manufacturer part number: M013103
Manufacturer: Mimaki
Mimaki JV3-160SP printers can use this capping station with four print heads.
SKU: M007814
Manufacturer part number: M007814
Manufacturer: Mimaki
The Secabo S120 cutting plotters can use this carriage belt. This is the original Secabo part (number 990.0346.02). This carriage belt is 9 mm wide and 2813 mm long.
SKU: 990.0346.02
Manufacturer part number: 990.0346.02
Manufacturer: Secabo
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Select at least 2 products
to compare
Reviews
There are no reviews yet.