Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000000785
Manufacturer part number: 1000000785
Manufacturer: Roland
Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360297811
Manufacturer part number: 360297811
Manufacturer: Marabu
This Flushing Waste Fluid Receiver is suitable for Mutoh VJ-1614 printers. This is the original Mutoh part (number DE-36933).
SKU: DE-36933
Manufacturer part number: DE-36933
Manufacturer: Mutoh
This set of twenty straight through tube fittings made of white nylon that resist solvents is compatible with all wide format inkjet printers.
SKU: CC-1/20
Manufacturer: DIGIPRINT
Mimaki JV3-160SP printers are compatible with the generic cap slider 4H2.
SKU: PCADI12973
Manufacturers: DIGIPRINT , Mimaki
Mimaki JV3-160SP printers can use this capping station with four print heads.
SKU: M007814
Manufacturer part number: M007814
Manufacturer: Mimaki
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Select at least 2 products
to compare
Reviews
There are no reviews yet.