Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
This Assy, Drain is suitable for Roland BN-20 printers.
SKU: 1000025223
Manufacturer part number: 1000025223
Manufacturer: Roland
SKU: ASSR26-ND
Manufacturer part number: ASSR26-ND
Manufacturer: DIGIPRINT
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001172
Manufacturer part number: 1000001172
Manufacturer: Roland
For Roland XF-640 printers, this L-Bearing, Ssr15Xw2Gec1+2440Ly, is suitable. This is the original Roland part (number 1000010096).
SKU: 1000010096
Manufacturer part number: 1000010096
Manufacturer: Roland
This BELT,100S2M763LW-C is suitable for Roland printers. This is the original Roland part (number 1000012575).
SKU: 1000012575
Manufacturer part number: 1000012575
Manufacturer: Roland
This Belt Flat M 50.8x 0.127 x 78242 301 is suitable for Océ Arizona 440 GT / XT printers. The original Océ component (number 3010112872) is here. This steel belt has a total length of 8260mm and is 50mm wide.
SKU: 3W3010112872
Manufacturer part number: 3010112872
Manufacturer: Canon Océ
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.