Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
The ZUND L-2500 series is compatible with this generic timing belt.
SKU: PBEZU2500
Manufacturers: Zund , DIGIPRINT
This Belt, 150S2M2413LW-C is suitable for Roland VS-640 printers.
SKU: PBERO8421
Manufacturer part number: 1000006714
Manufacturer: Roland
Mimaki printers in the JV5, JV33, and CJV30 series can use this joint Valve Assy.
SKU: M006954
Manufacturer part number: M006954
Manufacturer: Mimaki
The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000005122
Manufacturer part number: 1000005122
Manufacturer: Roland
This X Speed Reduction Belt Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-46193
Manufacturer part number: DG-46193
Manufacturer: Mutoh
Roland VP-300 printers are compatible with this Carton, Sleeve Type2 model. This is the original Roland part (number 1000005505).
SKU: 1000005505
Manufacturer part number: 1000005505
Manufacturer: Roland
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.