Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste. The original Mutoh component (number DG-41175) is here. The outer diameter of this L-type fitting waste is 0.99 cm, while the inner diameter is 0.64 cm. A unit contains 20 fittings.
This Speed Controller with Fitting is suitable for Inktec Jetrix 2030 series printers.
SKU: AS1001FG-06
Manufacturer part number: 00-AK00-05
Manufacturer: Inktec
Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
The Mimaki SWJ printers are compatible with this Clean Timing Belt.
SKU: 150 S2M 380G
Manufacturer part number: 150 S2M 380G
Manufacturer: Mimaki
This Cap, Bottle PMP is suitable for Roland printers.
SKU: 7520501000
Manufacturer part number: 7520501000
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000010324
Manufacturer part number: 1000010324
Manufacturer: Roland
This Tube Fitting (Female) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48837
Manufacturer part number: DG-48837
Manufacturer: Mutoh
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.