Description
Roland XJ-640 printers are compatible with this Carton and Sleeve. The original Roland part in this case is 1000003567. The supply of this component has ceased. It has been discontinued by the manufacturer.
Mimaki / Mutoh / Roland Solvent Resistant Connector (ID: 2mm, OD: 3mm)
$15.08This solvent-resistant connector helps join two tubes with an ID of 2 mm and an OD of 3 mm.
SKU: PCNDI8743
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
Arizona 6100 FTG Push 1/4 OD 5/32 ID TEE – 3W3010105241
$19.73Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SKU: 3W3010105241
Manufacturer part number: 3010105241
Manufacturer: Canon Océ
Colorpainter 100S Capping Unit (100) – U00097303400
$4,020.82This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: U00097303400
Manufacturer part number: U00097303400
Manufacturer: Oki
Stahls Hotronix Airfusion TRIAC – N-1-1059
$159.62This TRIAC is suitable for STAHLS Hotronix® Airfusion ™
SKU: N-1-1059
Manufacturer part number: N-1-1059
Manufacturer: Stahls
RS-540 Adapter, Joint 2-3FAI – 1000004796
$17.58The Roland RS-540 printers are compatible with this Adapter, Joint 2-3FAI.
SKU: 1000004796
Manufacturer part number: 1000004796
Manufacturer: Roland
FP-740 Carton, Guide Media TU-750 – 22605115
$16.02This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605115
Manufacturer part number: 22605115
Manufacturer: Roland
Related Products
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.