Description
This Belt Gantry GT is suitable for Océ Arizona 250 GT printers. This is the original Océ part (number 3010103684). This Belt Gantry GT is 385.6cm long and 3.8cm wide.
More Products
FP-740 Carton, Vk-Spacer – 1000001174
$25.11This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001174
Manufacturer part number: 1000001174
Manufacturer: Roland
JV3 Cap Top – M004908
$45.23The capping station of Mimaki JV3 printers is compatible with this generic cap top that resists solvents and has an iron and a transparent tube.
SKU: PCAROSB001
Manufacturers: DIGIPRINT , Roland
Straight Through Reduction Tube Fitting 2.4mm and 1.6mm (20 pcs)
$86.87This set of 20 solvent resistant black nylon straight through reduction fitting is suitable for all wide format inkjet printers printers.
SKU: AD-2/20
Manufacturer: DIGIPRINT
CONNECTOR,SUPPLAY SECTION HY431 – 1000021806
$35.19This CONNECTOR,SUPPLAY SECTION HY431 is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021806
Manufacturer part number: 1000021806
Manufacturer: Roland
RS-640 Carton, Stand – 1000004761
$202.38This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000004761
Manufacturer part number: 1000004761
Manufacturer: Roland
Cap Assy VJ-1626UH – DG-48181
$260.58This Cap Assy VJ-1626UH is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48181
Manufacturer part number: DG-48181
Manufacturer: Mutoh
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.