This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Mimaki printers can use this JV400 Fitting – VFI126.
SKU: VFI126
Manufacturer part number: VFI126
Manufacturer: Mimaki
This Head Connector Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-49274
Manufacturer part number: DG-49274
Manufacturer: Mutoh
The polyurethane belt has a length of 25 meters and is compatible with numerous printers.
SKU: PUS5M25-20m
Manufacturer: DIGIPRINT
This LAN Relay Connector Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48132
Manufacturer part number: DG-48132
Manufacturer: Mutoh
The Mimaki JV33 printers are compatible with this box of ten cap pads.
SKU: SPA-0161
Manufacturer part number: SPA-0161
Manufacturer: Mimaki
This TF Belt (S2M) with Pulley Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DH-40486
Manufacturer part number: DH-40486
Manufacturer: Mutoh
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.