This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This generic linear encoder board is suitable for Roland SP / FJ / SJ series printers.
SKU: PBOROSP6015
Manufacturer part number: 6700909040
Manufacturers: DIGIPRINT , Roland
This set of 3 fittings is suitable for EFI Vutek H2000.
SKU: PADVUG68W
Manufacturer: DIGIPRINT
This set of 20 black nylon UV resistant male luer lock stoppers is suitable for Mimaki UJF-3042 printers.
SKU: MTLLP-2/20
Manufacturer part number: MTLLP-2
Manufacturer: Mimaki
This Straight Hose Tail Coupling 1/8″ is suitable for a specific range of printers using Starfire printheads.
SKU: PMCD2202
Manufacturer part number: PMCD2202
Manufacturer: DIGIPRINT
This I/C Holder Exchange Kit is suitable for Mutoh Valuejet 426UF printers.
SKU: DG-45277
Manufacturer part number: DG-45277
Manufacturer: Mutoh
For Roland printers, this BELT,50S2M1435LW-C is suitable. The original Roland part (number 1000014723) is here.
SKU: 1000014723
Manufacturer part number: 1000014723
Manufacturer: Roland
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.