This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
The Roland FJ-540 / FP-740 waterbased printer’s capping station is compatible with this foam cap top in black. Long-lasting performance is provided by this cap top, which is designed specifically for Roland printers and water-based inks.
SKU: PCAROWB004
Manufacturers: DIGIPRINT , Roland
This nylon Y tube fitting is compatible with all wide format inkjet printers and resists solvents.
SKU: Y260-1
Manufacturer: DIGIPRINT
For Roland FP-740 printers, this L-Bearing, SSR15XW1GGE/W2GE+1830L is suitable. The original Roland part in this case is number 1000000099. This L-Bearing is 2860mm long.
SKU: 1000000099
Manufacturer part number: 1000000099
Manufacturer: Roland
This set of 20 solvent resistant black nylon straight through tube fitting is suitable for all wide format inkjet printers printers.
SKU: CC-2/20
Manufacturer: DIGIPRINT
This original Roland component, the CONNECTOR, SUPPLAY SECTION LPLUG31, is compatible with a specific line of Roland printers.
SKU: 1000021812
Manufacturer part number: 1000021812
Manufacturer: Roland
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.