This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Ricoh IP5000 printers are compatible with this two-pack of generic Damper, Head Ink.
SKU: PDARI1972
Manufacturer part number: VV12X1972
Manufacturers: Ricoh , DIGIPRINT
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000004498
Manufacturer part number: 1000004498
Manufacturer: Roland
This Belt, 150S2M2168Lw-C is suitable for Roland VS-300i printers.
SKU: PBERO20184
Manufacturer part number: 1000010628
Manufacturer: Roland
This TX400-1800D Joint 3-3 – M601067 is suitable for Mimaki printers.
SKU: M601067
Manufacturer part number: M601067
Manufacturer: Mimaki
This generic toothed belt 160 is suitable for Mimaki CG-160FX cutting plotters.
SKU: PBEMI11471O
Manufacturer part number: M800709
Manufacturers: DIGIPRINT , Mimaki
The VUTEk GS-Series printers are compatible with this set of 100 Fitting Luer 3/32 Female.
SKU: FTL220/1
Manufacturer part number: P2122-A
Manufacturer: EFI
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.