This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
All wide format inkjet printers can use this set of twenty solvent-resistant nylon Y tube fittings.
SKU: Y260-1/20
Manufacturer: DIGIPRINT
The Roland ER-641, ER-642, and XP-640 printers can use this cap top.
SKU: 6000007921
Manufacturer part number: 6000007921
Manufacturer: Roland
This Pulley Belt is suitable for Mimaki JV5 Series printers. This is the original Mimaki part (number 40S2M520). This Pulley Belt has a circumference of 51.4cm and is 0.4cm wide.
SKU: PBEMI11129
Manufacturer part number: 40S2M520
Manufacturer: Mimaki
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000002081
Manufacturer part number: 1000002081
Manufacturer: Roland
This Bearing F8-16ZZ is an original Roland part, suitable for a specific range of Roland printers.
SKU: 22175815
Manufacturer part number: 22175815
Manufacturer: Roland
Mimaki UJV-110, UJF-605C, and UJF-605RII printers are compatible with this Damper Connector Assy. This is the original Mimaki part (number M005842).
SKU: M005842
Manufacturer part number: M005842
Manufacturer: Mimaki
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.