This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This CONNECTOR,SUPPLAY SECTION HY431 is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021806
Manufacturer part number: 1000021806
Manufacturer: Roland
This BEARING,FLWA675ZZ is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000008823
Manufacturer part number: 1000008823
Manufacturer: Roland
Mimaki JV3-160SP printers can use this generic bearing.
SKU: PMEMI13513
Manufacturer part number: F607ZZ
Manufacturers: Mimaki , DIGIPRINT
This BEARING 10-19ZZ is an original Roland part, suitable for a specific range of Roland printers.
This Steel Belt Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-49266
Manufacturer part number: DG-49266
Manufacturer: Mutoh
Open White PU Belt, Generic, S2M 15mm
SKU: GALS2M5O
This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.