This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Roland SJ-1000 printers are compatible with this L-BEARING,SSR15XW2GE+3500LY 2. The original Roland part in this case is number 1000001005.
SKU: 1000001005
Manufacturer part number: 1000001005
Manufacturer: Roland
SummaCut cutters can use this BELT X-MOTOR 87T.
SKU: 008926
Manufacturer part number: MB0315
Manufacturer: Summa
This set of 20 Male Luer Integral Lock Ring to Female Luer Thread Style Coupler is used to convert a male luer connector to a female lure connector.
SKU: LC34-9/20
Manufacturer: DIGIPRINT
Summa SummaSign cutters are compatible with this BELT MXL 110 T 9,5 WIDE U/K. The original Summa part (number MB9950) can be found here. The circumference of this BELT MXL 110 T 9,5 WIDE U/K is 110 millimeters.
SKU: PBESUSU6022
Manufacturer part number: MB9950
Manufacturer: Summa
The Roland AJ-1000 printers are compatible with this Tube Joint Adapter.
SKU: 1000000522
Manufacturer part number: 1000000522
Manufacturer: Roland
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Select at least 2 products
to compare
Reviews
There are no reviews yet.