This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Roland VS-640 printers can use this generic belt.
SKU: 001966
Manufacturer part number: 1000006725
Manufacturers: Roland , DIGIPRINT
EFI VUTEk GS5000r printers are compatible with this timing belt.
SKU: 45085360
Manufacturer part number: 45085360
Manufacturer: EFI
Mutoh printers with a bulk ink system can use this connector, which has a diameter of 3 to 4 mm. The original Mutoh part (number FC-402007) can be found here.
SKU: FC-402007
Manufacturer part number: FC-402007
Manufacturer: Mutoh
This Bearing is suitable for EFI Vutek 3250-LX printers.
SKU: 3207A-2Z/C3
Manufacturer: EFI
This generic unit for capping printers is suitable for Mimaki JV5 and JV33.
SKU: PCAMIJV5001
Manufacturers: DIGIPRINT , Mimaki , Roland
This 46 inches steel Belt is suitable for Mutoh RJ-6100-46 (Falcon) printers. This is the original Mutoh part (number DE-49764C).
SKU: DE-49764C
Manufacturer part number: DE-49764C
Manufacturer: Mutoh
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.