$76.53

Marabu Clearshield® Classic – 1L, Gloss

Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. ClearShield® Classic is formulated for use with a wide range of non-water-sensitive media such as banner or self-adhesive vinyl and all solvent, eco-solvent, Latex and UV inks

SKU: 360297911
Manufacturer part number: 360297911
Manufacturer: Marabu

Compare
SKU: 360297911 Categories: ,
Description

Description

Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. All solvent, eco-solvent, latex, and UV inks can be used with ClearShield® Classic, which is designed to be used with a wide variety of non-water-sensitive media like banners and self-adhesive vinyl.

Benefits :
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.

Specifications :
Product type : Water based liquid coating
Durability: 5-7 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller

Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics

Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.

Products available :
ClearShield® Classic Gloss – 1L – 360297911
ClearShield® Classic Gloss – 5L – 360298911
ClearShield® Classic Semi Gloss – 1L – 360297912
ClearShield® Classic Semi Gloss – 5L – 360298912
ClearShield® Classic Matte ++ – 1L – 360297924
ClearShield® Classic Matte ++ – 5L – 360298924

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Marabu Clearshield® Classic – 1L, Gloss”

Your email address will not be published. Required fields are marked *

More Products
This product has multiple variants. The options may be chosen on the product page

Jetrix 3015 Bearing Block – HSR20

$337.77

This Jetrix 3015 Bearing Block – HSR20 is suitable for Inktec printers.

SKU: 414HSR20RSS
Manufacturer part number: HSR20
Manufacturer: Inktec

This product has multiple variants. The options may be chosen on the product page

VJ-1324 Y Type Fitting Assy – DG-42982

$417.36

This Y Type Fitting Assy is suitable for Mutoh VJ-1324 printers.

SKU: DG-42982
Manufacturer part number: DG-42982
Manufacturer: Mutoh

XR-640 Carton, Cable Cover – 1000009862

$62.59

This product has been discontinued by the manufacturer. Please scroll down for more information below.

SKU: 1000009862
Manufacturer part number: 1000009862
Manufacturer: Roland

End Cap (Female) – DG-48838

$210.16

This End Cap (Female) is an original Mutoh part, suitable for a specific range of Mutoh printers.

SKU: DG-48838
Manufacturer part number: DG-48838
Manufacturer: Mutoh

Anapurna Mv Solution Bar – D2+7130209-0009

$5,211.65

Agfa: Anapurna Mv and Dilli NEO Titan UVT-1606W printers can use this solution bar. This is the original Agfa oart (number D2+7130209-0009).

SKU: D2+7130209-0009
Manufacturer part number: D2+7130209-0009
Manufacturer: Agfa

This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.

$15.08

This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.

SKU: PCNDI8745
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki